When only the best will do, select SANDPIPER
With a rich history of over 55 years in delivering exceptional Air Operated Double Diaphragm pumping solutions and unparalleled expertise, SANDPIPER has established itself as the best-in-class leader in tackling your toughest and most demanding pumping challenges.
OUR SIGNATURE ENSURES YOUR SUCCESS
SANDPIPER Signature Series AODD pumps are engineered to deliver industry leading durability and performance, even for your most severe applications and environments
WHY CHOOSE AODD PUMPS
Performing in the most challenging applications, AODD pumps deliver unique benefits that are unrivaled by other pump technologies
AODD pumps are air (or natural gas) operated displacement type pumps which uniquely differ from all other positive displacement pumps. As a result of air pressure acting on the entire surface of the diaphragm, the diaphragm is in a balanced condition while pumping. This measurably extends diaphragm life over that of mechanically operated diaphragm pumps. Because compressed air is limited, the maximum pressure developed by the pump is also safely limited. Thus, AODD pumps
are appropriately selected for on-demand intermittent requirements.
Performing in the most challenging applications, AODD pumps deliver unique benefits that are unrivaled by other pump technologies
AODD pumps are air (or natural gas) operated displacement type pumps which uniquely differ from all other positive displacement pumps. As a result of air pressure acting on the entire surface of the diaphragm, the diaphragm is in a balanced condition while pumping. This measurably extends diaphragm life over that of mechanically operated diaphragm pumps. Because compressed air is limited, the maximum pressure developed by the pump is also safely limited. Thus, AODD pumps
are appropriately selected for on-demand intermittent requirements.
Unique Performance
Although the AODD pump is a positive displacement type of pump, it is actually a hybrid and defies strict classification. While its pressure versus capacity characteristics resemble those of a centrifugal pump, it is best defined as a sealless, non (or semi) positive displacement pump.
Although the AODD pump is a positive displacement type of pump, it is actually a hybrid and defies strict classification. While its pressure versus capacity characteristics resemble those of a centrifugal pump, it is best defined as a sealless, non (or semi) positive displacement pump.
Features & Benefits
- Dry-run without damaging the pump or system
- Pumps solid laden fluids without pump or product damage
- Self-priming, works in suction lift applications
- Deadheads safely, with no pump or product damage
- Shear sensitive, does not shear or separate product being pumped
- No electricity required, and can be fully grounded
- Low initial purchase price compared to other technologies
- Submersible, can be submerged completely without safety or performance issues
- Sealless design, no expensive mechanical seals or packing are required
- Variable flow and head pressures, without sophisticated controls
- Optional bottom discharge porting depending on fluid characteristics
THE SANDPIPER ADVANTAGE
With over 50 years of pumping expertise, we provide application driven pumping solutions
With over 50 years of pumping expertise, we provide application driven pumping solutions
All Bolted Construction
- Superior reliability is defined by our all bolted pump construction that allows for instant part alignment, uniform torquing of seals, and high pressure capabilities
Various Power Sources
- SANDPIPER pumps operate at optimum performance using compressed air, but we also have pumps available for running off of your local reserve of natural gas
Tested Quality
- SANDPIPER pumps are 100% wet tested after final assembly to ensure proper functionality; Testing includes, but is not limited to, deadheading, priming, and sealing
Superior Performance
- For Flap Valve pumps the hinge pads exert positive pressure on the flaps allowing the pump to operate in virtually any position, helping deliver superior suction lift and flow rates
Guaranteed Connecting Rod
- Our durable, corrosion resistant 416 (Martensitic) and/or 316 (Austenitic) Stainless Steel diaphragm connecting rod is guaranteed not to yield under tension, compression, or bending
ESADS+Plus Air Valve
- Externally Serviceable Air Distribution System
EXCLUSIVE PUMP CONFIGURATIONS
With the broadest range of configurations, SANDPIPER has the best solutions for your pumping needs.
With the broadest range of configurations, SANDPIPER has the best solutions for your pumping needs.
HEAVY DUTY FLAP VALVE
Unique features for this configuration include:
Unique features for this configuration include:
- Pumps up to line size solids
- Bottom discharge porting, discharges settling solids
- Superior suction lift of up to 24 ft.
- Easy access to serviceable components
- Thick manifold and chamber walls
- Diaphragm wear pads extend service life
HEAVY DUTY BALL VALVE
Unique features for this configuration include:
Unique features for this configuration include:
- Down ported option, discharges settling solids
- Weighted check balls for handling viscous fluids
- Top ported option, discharges floating solids, suspended solids or entrained gases
- Side ported option for use in confined spaces
- Thick manifold and chamber walls
- Diaphragm wear pads extend service life
CONTAINMENT DUTY BALL VALVE
Unique features for this configuration include:
Unique features for this configuration include:
- Containment chamber with leak detection
- Hydraulically balanced / coupled pumping and driver diaphragm assemblies
- Solids range +.25" (6mm) to .71" (18mm)
- Dry primes up to 18' of water
- Prevent compressed air from entering pumped fluid in the event of a diaphragm failure
STANDARD DUTY BALL VALVE
Unique features for this configuration include:
Unique features for this configuration include:
- Solids range +.03" (1mm) to .71" (18mm)
- Dry primes up to 20' of water
- ESADS+ Air Distribution System
Product Services
Performance Testing
Performance Testing
- 100% of all pumps are wet tested at the end of the manufacturing process including pressure testing and deadheading to ensure leak free performance.
- Hydro/pneumatic testing 90 psi (standard), hydro/ pneumatic 1.5 times maximum operating pressure
- Pump repair services for labor only
- Certificate of origin, conformance (pump) and compliance (material), material tests reports, non-certified or certified dimensional outlines (contact SANDPIPER Application Engineering to order)
- PMI (Positive Material Identification), hardness testing, and others upon request
Offering the widest range of performance and application capabilities
STANDARD DUTY BALL VALVE
Offering the widest range of performance and application capabilities
Standard Duty Non-Metallic Pumps are suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids. These pumps are constructed in non-metallic materials such as PTFE, Polypropylene, PVDF, Conductive Polypropylene, Conductive PVDF and Nylon with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.
HEAVY DUTY FLAP VALVE PUMP
For Fluids Containing up to Line Size Solids
HDF Pumps are recommended for abrasive slurries, non-suspended solids and line-size solids requirements. All SANDPIPER Heavy Duty Flap Valve Pumps are configured in bottom discharge porting arrangements and provide superior suction lift. HDF pumps are thick wall constructed of Sand Casted Aluminum, Cast Iron and Stainless Steel with elastomer, TPE (thermal plastic elastomers) in diaphragms and check valves. HDF pumps are enhanced with an extended wear package.
HEAVY DUTY BALL VALVE PUMP
For Fluids Containing Settling, Suspended & Floating Solids
HDB Metallic Pumps are ideal for thin to highly viscous and small solids-laden fluids, while providing excellent suction lift capability and exclusive variable porting options (side, top, bottom and dual). HDB pumps are thick wall constructed of Sand Casted Aluminum, Cast Iron, Stainless Steel or Alloy C with elastomer, TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.
CONTAINMENT DUTY PUMPS
The only complete line of AODD pumps featuring superior fluid containment; protecting your people, environment, and pump
Containment Duty Pumps are ideal for highly corrosive and hazardous chemical fluid applications. They are designed with containment chambers, hydraulically balanced/coupled pumping diaphragm and driver diaphragm assemblies and accommodate visual, mechanical and low voltage leak detection devices. CD pumps are constructed of Aluminum, Cast Iron, Stainless Steel, Alloy C, Polypropylene and PVDF with TPE (thermal plastic elastomers), PTFE options in diaphragms and check valves.
ST1 / ST25 Metallic
ST1½ / ST40 Metallic
S1F Non-Metallic
S15 Non-Metallic
S20 Non-Metallic
S30 Non-Metallic
DUAL POWER NATURAL GAS
Industry-leading performance and market-specific technology
Traditional AODD pumps are designed for use with air only. Over the years, oil and gas operators have opted to power their diaphragm pumps with easily accessible natural gas. The application of AODD pumps driven by natural gas created a unique set of safety requirements that previously did not exist. In 2003, SANDPIPER partnered with the Canadian Standards Association (CSA®) to lead the development of the first-ever safety certification for gas-operated double-diaphragm (GODD) pumps.
G10F Metallic
G20F Metallic
DUAL POWER NATURAL GAS
G05 Metallic
G1F Metallic
G15 Metallic
G20 Metallic
G30 Metallic
GH2-M Metallic 2:1 High Pressure
STANDARD FDA COMPLIANT T-SERIES
FDA-Compliant food processing aodd pumps
FDA (Food & Drug Administration) Material Compliant Pumps are ideally suited for a variety of food processing, pharmaceutical and cosmetic industry applications. The pumps are available in 1” through 3” ball check valve designs and a 2” (line size solids handling) flap check valve design. Variable flow capacities across the range are 0–285 gallons per minute.
STANDARD FDA COMPLIANT FB SERIES
FDA-Compliant food processing aodd pumps
FDA (Food & Drug Administration) Material Compliant Pumps are ideally suited for a variety of food processing, pharmaceutical and cosmetic industry applications. The pumps are available in 1/2” through 3” ball check valve designs. Variable flow capacities across the range are 0–234 gallons per minute.
FB05 Metallic
FB10 Metallic
FB15 Metallic
FB20 Metallic
FB30 Metallic
HIGH POLISHED SANITARY PUMP FB SERIES
For applications where highly polished wetted surface finish is Ra 32
The sanitary and hygienic pumps offer exceptional cleanability, ease of maintenance and superior reliability. FDA-compliant pumps, the F15C and F20C models are built for food processing and personal care applications
FB15 Metallic - Sanitary
FB20 Metallic - Sanitary
FB15 Metallic - 3A
FB20 Metallic - 3A
PREMIUM FDA COMPLIANT PUMPS
For pharmaceutical, nutraceutical and personal care pumping applications
The SANDPIPER SSB1 & SSB2 hygienic pump has been the ideal choice for pharmaceutical, nutraceutical and personal care pumping applications for more than 30 years. This robust AODD pump is constructed from polished 316 stainless steel and features FDA-compliant nitrile diaphragms and check balls. The tri-clamp construction makes this pump easily compatible with your sanitary system design
SSB1 / DSB1 Metallic
SSB2 Metallic
SUBMERSIBLE CENTRIFUGAL PUMPS
Submersible pumps for dewatering even with trash & debris
The PortaPump® Submersible, Battery-Powered Pump operates using any 12-volt car or truck battery. It comes equipped with cables and battery clips. Extremely portable, the pump weighs only 33 pounds (15 kg) and can fit through openings as small as 10” (25cm). Electrically safe and whisper quiet.
SPA1½-E Metallic
The SludgeMaster™ Submersible, Air-Powered Trash Pump handles mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1½” (3.8cm). High capacity, low head. The pump weighs only 59 pounds (26kg), and can fit through an opening as small as 14” (35cm). Sturdy construction for rough handling and long life. Optional rock screen available.
SMA3 Metallic
UL LISTED PUMPS
UL-Listed AODD pump for flammable liquids transfer
UL (Underwriters Laboratories) Listed Pumps are designed to meet UL79 standards for diaphragm pumps handling flammable liquids. All Aluminum construction with approved Nitrile or Virgin PTFE UL elastomers. Fully groundable to prevent static discharge.
U1F Metallic
HIGH PRESSURE PUMPS
For fluids containing up to line size solids
Air-Powered Single Diaphragm High Pressure Metallic Pumps deliver discharge pressure twice the inlet pressure, up to 250 PSI (17.2 BAR). Designed for filter press feed and applications requiring higher discharge pressures. Available in Aluminum, Cast Iron and Stainless Steel with various elastomer options. Equipped with elastomeric seals and components that are compatible with the various chemicals normally expected to be found in natural gas.
SH2-M Metallic
EH2-M Metallic
HP10 Metallic
HP20 Metallic
GH2-M Metallic 2:1 High Pressure
Standard Duty Metallic Pumps are ideally suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids. Standard duty pumps are constructed in Aluminum, Cast Iron, Stainless Steel with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.
S05 Metallic
S1F Metallic
S15 Metallic
S20 Metallic
S30 Metallic
S20 Metallic
S30 Metallic
STANDARD DUTY BALL VALVE
Offering the widest range of performance and application capabilities
Standard Duty Non-Metallic Pumps are suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids. These pumps are constructed in non-metallic materials such as PTFE, Polypropylene, PVDF, Conductive Polypropylene, Conductive PVDF and Nylon with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.
PB ¼ Non-Metallic
WR10 Non-Metallic
S05 Non-Metallic
S07 Non-Metallic
S10 Non-Metallic
S1F Non-Metallic
SPE10
SANDPIPER pumps are evolving to perform better than ever. Introducing the new, patent pending SANDPIPER EvolutionX 1” pump, the first to launch in a series of pump sizes. This innovative air operated double diaphragm pump design is the culmination of over 55 years of industry leading research, development and engineering in pump & fluid dynamics. The EvolutionX represents the pinnacle of performance, efficiency and serviceability.
S07 Non-Metallic
S10 Non-Metallic
S1F Non-Metallic
SPE10
SANDPIPER pumps are evolving to perform better than ever. Introducing the new, patent pending SANDPIPER EvolutionX 1” pump, the first to launch in a series of pump sizes. This innovative air operated double diaphragm pump design is the culmination of over 55 years of industry leading research, development and engineering in pump & fluid dynamics. The EvolutionX represents the pinnacle of performance, efficiency and serviceability.
Features:
- Lower energy use – Achieves an incredible 20% average increase in air efficiency throughout the entire curve over our prior model.
- High flow – The EvolutionX has the highest flow rate of any other 1” AODD pump.
- Enhanced Convenience – Exponentially reduce AODD pump assembly and service time
Increased Installation & Porting Flexibility:
Durable, non-metallic construction rated for operation up to 125 psi with ATEX versions available. The standard EvolutionX configuration features a versatile 3-piece manifold with a universal ANSI & ISO flanged connection. Users can quickly adjust the discharge outlet for porting in multiple directions. Other porting options include a single-piece end-ported manifold or a dual-ported option. The mounting feet are extremely versatile and fit existing SANDPIPER pumps and multiple other manufacturers’ dimensions.
S15 Non-Metallic
S20 Non-Metallic
S30 Non-Metallic
Durable, non-metallic construction rated for operation up to 125 psi with ATEX versions available. The standard EvolutionX configuration features a versatile 3-piece manifold with a universal ANSI & ISO flanged connection. Users can quickly adjust the discharge outlet for porting in multiple directions. Other porting options include a single-piece end-ported manifold or a dual-ported option. The mounting feet are extremely versatile and fit existing SANDPIPER pumps and multiple other manufacturers’ dimensions.
S15 Non-Metallic
S20 Non-Metallic
S30 Non-Metallic
HEAVY DUTY FLAP VALVE PUMP
For Fluids Containing up to Line Size Solids
HDF Pumps are recommended for abrasive slurries, non-suspended solids and line-size solids requirements. All SANDPIPER Heavy Duty Flap Valve Pumps are configured in bottom discharge porting arrangements and provide superior suction lift. HDF pumps are thick wall constructed of Sand Casted Aluminum, Cast Iron and Stainless Steel with elastomer, TPE (thermal plastic elastomers) in diaphragms and check valves. HDF pumps are enhanced with an extended wear package.
HDF1 / HDF25 Metallic
HDF2 / HDF50 Metallic
HDF3-A / 4-A Metallic
HDF3-M / 4-M Metallic
HD20F Non-Metallic
HDF3-M / 4-M Metallic
HD20F Non-Metallic
HEAVY DUTY BALL VALVE PUMP
For Fluids Containing Settling, Suspended & Floating Solids
HDB Metallic Pumps are ideal for thin to highly viscous and small solids-laden fluids, while providing excellent suction lift capability and exclusive variable porting options (side, top, bottom and dual). HDB pumps are thick wall constructed of Sand Casted Aluminum, Cast Iron, Stainless Steel or Alloy C with elastomer, TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.
SB1 / SB25 Metallic
HDB1½ / HDB40 Metallic
HDB2 / HDB50 Metallic
HDB3 / HDB4 Metallic
HDB1½ / HDB40 Metallic
HDB2 / HDB50 Metallic
HDB3 / HDB4 Metallic
CONTAINMENT DUTY PUMPS
The only complete line of AODD pumps featuring superior fluid containment; protecting your people, environment, and pump
Containment Duty Pumps are ideal for highly corrosive and hazardous chemical fluid applications. They are designed with containment chambers, hydraulically balanced/coupled pumping diaphragm and driver diaphragm assemblies and accommodate visual, mechanical and low voltage leak detection devices. CD pumps are constructed of Aluminum, Cast Iron, Stainless Steel, Alloy C, Polypropylene and PVDF with TPE (thermal plastic elastomers), PTFE options in diaphragms and check valves.
ST1 / ST25 Metallic
ST1½ / ST40 Metallic
S1F Non-Metallic
S15 Non-Metallic
S20 Non-Metallic
S30 Non-Metallic
DUAL POWER NATURAL GAS
Industry-leading performance and market-specific technology
Traditional AODD pumps are designed for use with air only. Over the years, oil and gas operators have opted to power their diaphragm pumps with easily accessible natural gas. The application of AODD pumps driven by natural gas created a unique set of safety requirements that previously did not exist. In 2003, SANDPIPER partnered with the Canadian Standards Association (CSA®) to lead the development of the first-ever safety certification for gas-operated double-diaphragm (GODD) pumps.
G10F Metallic
G20F Metallic
DUAL POWER NATURAL GAS
G05 Metallic
G1F Metallic
G15 Metallic
G20 Metallic
G30 Metallic
GH2-M Metallic 2:1 High Pressure
STANDARD FDA COMPLIANT T-SERIES
FDA-Compliant food processing aodd pumps
FDA (Food & Drug Administration) Material Compliant Pumps are ideally suited for a variety of food processing, pharmaceutical and cosmetic industry applications. The pumps are available in 1” through 3” ball check valve designs and a 2” (line size solids handling) flap check valve design. Variable flow capacities across the range are 0–285 gallons per minute.
T1F Metallic
T15 Metallic
T20 Metallic
T30 Metallic
TSA2 Metallic
T15 Metallic
T20 Metallic
T30 Metallic
TSA2 Metallic
STANDARD FDA COMPLIANT FB SERIES
FDA-Compliant food processing aodd pumps
FDA (Food & Drug Administration) Material Compliant Pumps are ideally suited for a variety of food processing, pharmaceutical and cosmetic industry applications. The pumps are available in 1/2” through 3” ball check valve designs. Variable flow capacities across the range are 0–234 gallons per minute.
FB05 Metallic
FB10 Metallic
FB15 Metallic
FB20 Metallic
FB30 Metallic
HIGH POLISHED SANITARY PUMP FB SERIES
For applications where highly polished wetted surface finish is Ra 32
The sanitary and hygienic pumps offer exceptional cleanability, ease of maintenance and superior reliability. FDA-compliant pumps, the F15C and F20C models are built for food processing and personal care applications
FB15 Metallic - Sanitary
FB20 Metallic - Sanitary
FB15 Metallic - 3A
FB20 Metallic - 3A
PREMIUM FDA COMPLIANT PUMPS
For pharmaceutical, nutraceutical and personal care pumping applications
The SANDPIPER SSB1 & SSB2 hygienic pump has been the ideal choice for pharmaceutical, nutraceutical and personal care pumping applications for more than 30 years. This robust AODD pump is constructed from polished 316 stainless steel and features FDA-compliant nitrile diaphragms and check balls. The tri-clamp construction makes this pump easily compatible with your sanitary system design
SSB1 / DSB1 Metallic
SSB2 Metallic
SUBMERSIBLE CENTRIFUGAL PUMPS
Submersible pumps for dewatering even with trash & debris
The PortaPump® Submersible, Battery-Powered Pump operates using any 12-volt car or truck battery. It comes equipped with cables and battery clips. Extremely portable, the pump weighs only 33 pounds (15 kg) and can fit through openings as small as 10” (25cm). Electrically safe and whisper quiet.
SPA1½-E Metallic
The SludgeMaster™ Submersible, Air-Powered Trash Pump handles mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1½” (3.8cm). High capacity, low head. The pump weighs only 59 pounds (26kg), and can fit through an opening as small as 14” (35cm). Sturdy construction for rough handling and long life. Optional rock screen available.
SMA3 Metallic
UL LISTED PUMPS
UL-Listed AODD pump for flammable liquids transfer
UL (Underwriters Laboratories) Listed Pumps are designed to meet UL79 standards for diaphragm pumps handling flammable liquids. All Aluminum construction with approved Nitrile or Virgin PTFE UL elastomers. Fully groundable to prevent static discharge.
U1F Metallic
HIGH PRESSURE PUMPS
For fluids containing up to line size solids
Air-Powered Single Diaphragm High Pressure Metallic Pumps deliver discharge pressure twice the inlet pressure, up to 250 PSI (17.2 BAR). Designed for filter press feed and applications requiring higher discharge pressures. Available in Aluminum, Cast Iron and Stainless Steel with various elastomer options. Equipped with elastomeric seals and components that are compatible with the various chemicals normally expected to be found in natural gas.
SH2-M Metallic
EH2-M Metallic
HP10 Metallic
HP20 Metallic
GH2-M Metallic 2:1 High Pressure